Nickel 600
Alloy: 600 (UNS N06600)
Form: Plate, Sheet, Strip, Bar
Condition: Annealed, Solution Annealed
Thickness: 0.5mm to 100mm
BAOHUI STEEL supplies Nickel 600 (UNS N06600, commonly known as Inconel 600), a standard engineering nickel-chromium alloy designed for applications requiring resistance to corrosion and high-temperature oxidation. The alloy's combination of nickel content for corrosion resistance and chromium content for high-temperature strength makes it suitable for a wide range of demanding applications from cryogenic temperatures to elevated temperatures above 1000°C.
Key Features
Excellent High-Temperature Strength
Good mechanical properties up to 1100°C
Outstanding Oxidation Resistance
Resists scaling and oxidation at high temperatures
Good Corrosion Resistance
Resists various corrosive media, including acids and alkalis
Excellent Chloride Stress Corrosion Cracking Resistance:
Superior to stainless steels
Good Mechanical Properties
Maintains strength from cryogenic to high temperatures
Easy to Fabricate
Good weldability and formability
Technical Specifications
|
Parameter |
Specification |
|
Standard |
ASTM B168, AMS 5540 |
|
Alloy |
600 (UNS N06600) |
|
Form |
Plate, Sheet, Strip, Bar |
|
Condition |
Annealed, Solution Annealed |
|
Thickness |
0.5mm to 100mm |
Chemical Composition
|
Weight% |
C |
S |
Cr |
Cu |
Mn |
Si |
Ni |
Fe |
|
Nickel Alloy 600 |
0.15 max |
0.015 max |
14.0 - 17.0 |
0.50 max |
1.0 max |
0.50 max |
72.0 min |
6 - 10 |
Mechanical Properties
|
Material Form and Condition |
Tensile Strength |
Yield Strength |
Elongation % |
Hardness, Rockwell |
|||
|
KSI |
MPa |
KSI |
MPa |
||||
|
Alloy 600 rod and bar |
Cold drawn Annealed |
80-100 |
550-690 |
25-50 |
170-345 |
55-35 |
65-85B |
|
Alloy 600 Plate |
Hot rolled Annealed |
80-100 |
550-725 |
30-50 |
205-345 |
55-35 |
65-85B |
|
Alloy 600 Sheet |
Cold Rolled Annealed |
80-100 |
550-690 |
30-45 |
205-310 |
55-35 |
88B max |
|
Alloy 600 Tube and Pipe |
Cold Drawn Annealed |
80-100 |
550-690 |
25-50 |
170-345 |
55-35 |
88B max |
|
Alloy 600 Wire |
Cold Drawn Annealed |
80-120 |
550-830 |
35-75 |
240-520 |
45-20 |
- |
|
Alloy 600 Wire |
Cold Drawn No 1 Temper |
105-135 |
725-930 |
70-105 |
480-725 |
35-15 |
- |
|
Alloy 600 Wire |
Spring Temper |
170-220 |
1170-1520 |
150-210 |
1035-1450 |
5-2 |
- |
Our Quality Promise
At BAOHUI STEEL, Nickel 600 quality is built into every step of our process. We deliver materials you can trust through:
Verified Material Integrity
Full EN 10204 3.1 certification with every order
Complete traceability from raw materials to finished products
Independent third-party inspection support (SGS/BV/TUV)
Rigorous Testing Protocol
Chemical composition verified by spectrometer analysis
Mechanical properties tested to ASTM standards
Dimensional accuracy guaranteed within strict tolerances
Performance Assurance
Surface quality inspection for defect-free delivery
Proper protective packaging for optimal condition
Consistent batch-to-batch reliability
Your trusted partner for guaranteed quality nickel alloys.
Applications
Chemical and Food Processing
Used in the manufacture of corrosion-resistant pipes, valves, heat exchangers, fatty acid containers, and phenol condensers.
Aerospace
Used as a material for high-temperature components such as engine combustion chambers and turbine blades, ensuring the safety of aircraft and rockets in extreme environments.
Nuclear Energy
Nickel 600 Used in nuclear reactor pressure vessels, steam generators, and nuclear fuel cladding, withstanding high temperatures, pressures, and radiation.
Other High-Temperature Applications
Utilized in heat treatment equipment, grates, and thermocouple protection tubes for its heat resistance and anti-fouling properties.
Machining and Treatment
Due to the high strength and work-hardening tendency of Inconel 600, the following points should be noted during machining:
Machining
It is recommended to use carbide tools, with low cutting speeds and high feed rates to reduce tool wear.
Heat Treatment
Solution treatment can improve the material's machinability, but the temperature and duration must be strictly controlled to avoid compromising the final properties.
Weldability
Nickel 600 can be welded using a variety of methods, but appropriate welding materials and process parameters must be selected to ensure weld quality.
Hot Tags: nickel 600, China nickel 600 manufacturers, suppliers, factory, ASTM B165 UNS N04400 Seamless Pipe, ASTM B622 UNS N10276 Seamless Pipe, Incoloy 800 Seamless Pipe, Nickel 400, Nickel Alloy 400, W Nr 2 4375
Previous
Nickel K500Next
Nickel 601You Might Also Like
Send Inquiry