Stainless Steel 410 Seamless Pipe
Grade: 410 (UNS S41000)
Type: Seamless
Size Range: 1/8" OD to 4" OD
Wall Thickness: 0.5mm to 5.0mm
Length: Custom cut lengths available
quality control: Support for third-party inspections (SGS, TÜV, BV, etc.)
Packaging: Reliable packaging (wooden crates, plastic caps, woven sacks)
BAOHUI STEEL manufactures Stainless Steel 410 Seamless Pipe, a general-purpose martensitic chromium stainless steel that combines good corrosion resistance with high strength and hardness capabilities. This grade can be heat-treated to develop a wide range of mechanical properties, making it suitable for applications requiring wear resistance and moderate corrosion resistance. Our seamless pipes ensure uniform microstructure and reliable performance in demanding service conditions.
Key Features
High Strength & Hardness
Can be heat-treated (hardened and tempered) to achieve high strength and good wear resistance.
Moderate Corrosion Resistance
Good resistance to water, some chemicals, and atmospheric corrosion, but less resistant than 304 or 316.
Magnetic
Exhibits strong magnetic properties.
Cost-Effective
Generally more affordable than austenitic and duplex grades.
Specifications & Standards
ASTM A268:
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service.
ASTM A511:
Standard Specification for Seamless Stainless Steel Mechanical Tubing.
AMS 5504:
Aerospace Material Specification (for tubing).
Technical Specifications
|
Parameter |
Specification |
|
Standard |
ASTM A268/A213 |
|
Grade |
410 (UNS S41000) |
|
Type |
Seamless |
|
Size Range |
1/8" OD to 4" OD |
|
Wall Thickness |
0.5mm to 5.0mm |
|
Length |
Custom cut lengths available |
Chemical Composition of Stainless Steel 410 Seamless Pipe
|
Element |
Requirements |
Typical Value |
|
Carbon (C) |
≤ 0.15 |
0.10 |
|
Chromium (Cr) |
11.5-13.5 |
12.5 |
|
Manganese (Mn) |
≤ 1.00 |
0.6 |
|
Phosphorus (P) |
≤ 0.040 |
0.025 |
|
Sulfur (S) |
≤ 0.030 |
0.015 |
|
Silicon (Si) |
≤ 1.00 |
0.5 |
|
Iron (Fe) |
Balance |
Balance |
Mechanical Properties (Annealed Condition)
|
Property |
Requirements |
Typical Value |
|
Tensile Strength |
≥ 415 MPa |
550 MPa |
|
Yield Strength |
≥ 205 MPa |
350 MPa |
|
Elongation |
≥ 25% |
30% |
|
Hardness (Brinell) |
≤ 217 HB |
180 HB |
Mechanical Properties (Hardened & Tempered)
|
Property |
Typical Value |
|
Tensile Strength |
850-1650 MPa |
|
Yield Strength |
700-1500 MPa |
|
Elongation |
15-25% |
|
Hardness (Brinell) |
250-400 HB |
Quality Assurance
- Mill Test Certificate EN 10204 3.1
- Hydrostatic or Eddy Current Testing
- Heat Treatment Certification
- Chemical Analysis Verification
- Mechanical Properties Testing
- Surface Quality Inspection
Heat Treatment Information
Annealing
Heat to 843-900°C, slow cool
Hardening
Heat to 980-1010°C, oil or air quench
Tempering
150-370°C for high hardness; 540-650°C for high toughness
Applications
General Engineering
Shafts, valves, pumps, fasteners, and fittings.
Oil & Gas
Well screens, piping for non-critical corrosive services.
Heat Exchangers
Tubes in mild environments.
Automotive
Exhaust systems components (non-critical parts).
Cutlery and Tools
Where moderate corrosion resistance and hardness are needed.
FAQ
Q: What is the main difference between 410 and 304 stainless steel?
A: 410 is martensitic (magnetic, heat-treatable) with lower corrosion resistance but higher strength, while 304 is austenitic (non-magnetic, not heat-treatable) with better corrosion resistance but lower strength.
Q: Can 410 stainless steel be welded?
A: Yes, but requires preheating (150-230°C) and post-weld heat treatment to prevent cracking and restore corrosion resistance.
Q: What is the maximum service temperature?
A: Intermittent service to 815°C; continuous service to 705°C in oxidizing atmospheres.
Q: Is 410 stainless steel magnetic?
A: Yes, 410 is magnetic in all conditions due to its martensitic microstructure.
Q: What surface finishes are available?
A: We can provide annealed, pickled, polished, or hardened and tempered surfaces as required.
Request a Quote
Contact us for Stainless Steel 410 Seamless Pipe pricing and technical support.
WhatsApp: 8613468954786
Email:baohui@bhsteelpipe.com
Hot Tags: stainless steel 410 seamless pipe, China stainless steel 410 seamless pipe manufacturers, suppliers, factory, stainless steel threaded pipe fittings, custom stainless steel pipe, ss tee fitting, ASTM A554 TP201 Tube, stainless seamless pipe, stainless press fittings
Next
No InformationYou Might Also Like
Send Inquiry